Author Archives: blogger

How to install your own aluminum fence

Posted on by

It’s really not as difficult as some people think to install their own aluminum fence… be it for around their backyard or for around their swimming pool.

The hardest part is the actual digging of the holes. They’re usually 2′ into the ground with a diameter of about 6″. You can use a standard post hole digger or make the process easier by using a hydraulic auger.

Before you start digging all the post holes (usually 72.5″ on center for a residential fence), make sure you mark off where your gates are going to be located. Keep in mind before digging your gate holes, that a 4′ wide gate is usually measured as the opening size from the inside edge of one gate post over to the near side of the other gate post.

More information about hanging a gate can be found at the link at the bottom of this page.

All the aluminum fence sections come pre-assembled and are ready to install. Once the post is in the ground, slide the fence rails into the holes in the posts and secure them with a self-tapping screw that goes into the post and through the rail inside of the post. Do this for each rail. Once that’s done, you can pour concrete into the post hole that you previously dug out. Time to move to the next hole and repeat the process.

To make sure that all the posts are in a straight line, tie a string to a stake and hammer it in the ground 1′ past or behind the one end or corner post with the other end connected to a stake in the ground 1′ past the last end or corner post in that line. Make sure that each post is right next to the string, but not touching it. Also make sure that each post is plumb by checking each side with a level… before the concrete has a chance to dry.

Continue this for each straight run of fence before attempting to hang the gate.

Further aluminum fence and gate installation instructions can be found in the link at the bottom of this page.

We hope you found this information helpful.

For more information about purchasing your own aluminum or vinyl fence, visit our website below.

We have some very unique styles of aluminum fence that are made from American aluminum extrusions and then fabricated in North Carolina, USA… to make them completely American made and assembled. Not very many of our competitors can say they same.

Interior Painting Rules Of Unity And Transition

Posted on by

Homeowners planning on interior painting often struggle over the issue of trim color during the planning process. Often they plan wall colors, on account of what they have seen in a magazine or while visiting a friend’s home. Maybe they have a particular fabric in mind and want to match a color in the fabric for the walls in that room. Anyway, the problem arises with what to do with the trim for that room. Is it possible to use a different trim color than the existing trim being used in other areas of your home?

While there is no absolute rule about trim color, that if broken, would cause you to be arrested by the color scheme patrol, there are some things you should consider.

1. The trim and ceilings of your home are what establishes a unified look and feel throughout your home. You can change your walls to any color that you like, or that fits with the theme you have planned for the interior of your home. The use of one color on the trim and ceilings will give you a smooth transition between wall colors as you travel throughout your home. Without this consistency, your home takes on a feeling of disunity.

2. White trim and some off-white colors will go with any wall color. That is why it is so popular. It gives you much greater flexibility in interior color coordination and design. Deciding to paint your trim a color other than white will limit your decorating options; however, I have seen some marvelous color co ordinations while using more color for trim.

If you really want to change the color of the trim for a particular room, then test the color. Try to get a feel for how it will impact the rooms or halls adjacent to that room. Will it be completely separated by a door? Will the door be closed most of the time? If the room is open to other areas of the house that are easily seen, how will that impact the color theme for the other parts of your home? You don’t want to put a lot of time and effort into painting a room if in the long run you’re not happy with how it makes the rest of your home look. Test the color on a door jamb or baseboard and then stand back and get a feel for what it does for unity of passage from other rooms to that room. It would be a good idea to wait a few days to see if you grow tired of the transition between colors. Often what we initially think looks good, loses its appeal over time.

How to Keep Cool in Your House and Save on Energy Bills this Summer

Posted on by

The only thing more brutal than the summer heat is the energy bill you’ll get from the electric company. Keeping your house cool can be a challenge when you want to keep your utility bills and energy use in check. Fortunately, there are many techniques you can use to keep your house cool and comfortable without relying heavily on the AC.

Cook outside instead of inside. Every time you use the oven or stove, you heat up your home. Your home is getting hot enough from the sun without the extra heat that will remain trapped for hours. If you must cook, use the grill or set up an outdoor stove. Better yet, cook less and eat more cool, uncooked salads in the summer.

Add shade to the sunny side of your house. One side of your house will always be sunnier than the other. In North America, Europe, and all places in the northern hemisphere, the southern side of your house will get more sun.
Mitigate the extra heat from the sun by adding shading plants or trees to the southern side of your house.

If trees are not an option, try adding a simple roof extension to offer some shade to the South-facing wall. This usually blocks a lot of heat absorption. It also gives you a shaded outdoor living space.

Use light-blocking window shades. For windows that receive a heavy dose of sunlight, cut down on the greenhouse effect by using shutters and shades during the day. Let in natural light through the North-facing windows only. Open windows that don’t get a lot of sunlight for a nice breeze.

When the sun goes down, open your windows and let your house air out. In areas that aren’t extremely humid, nights become cool. Your house will become stuffy on hot days. Opening windows at night allows fresh, cool air to flow in. Just remember to keep the screens shut to keep the summer insects out!

Modify your roof to be a lighter color. Black tiles suck up heat and transfer it to your home. Even a corrugated steel roof is cooler if it’s painted white. Using lighter colors or adding plants has significant cooling effects on your home.

Only use the AC when you’re home. It doesn’t matter what temperature your house is while you’re out. Only turn your AC on when you are at home and the temperature is truly uncomfortable. Turn the air conditioner off once your house is comfortable enough. Not only will you save on energy, your body will grow better heat tolerance, making the outside more comfortable. Also, you’ll appreciate your AC much more if you only run it sparingly.

An air conditioner is not the only way to cool down in your home this summer. Try keeping a variety of cold drinks or chilled water available. Downing a glass of icy lemonade will keep you cool and comfortable for at least an hour if sipped slowly.

You don’t need to spend a ton of money to keep your house cool. If you have the possibility, adding smart landscaping will keep your home more comfortable in the summer. If not, there are plenty of more affordable ways to stay cool at home in the summer heat.

Foolproof Advice For Home Improvement Projects

Posted on by

Home improvement has the exceptional benefit of improving your home’s value. Updating and maintaining your house is also a good way to make it energy efficient and to save money. Not only does home improvement often make financial sense, it can be a great way to pass the time, too. The terrific ideas below can be just the start you need.

If you can, put in actual wood flooring rather than laminate. Laminate looks like real wood but it cannot be refinished. In 10 or so years you or whoever owns the home will be required to get a whole new floor rather than refinishing it.

If you have the available funds you should choose real hard wood floors rather than laminate. While laminate flooring looks like wood and requires less maintenance and cleaning, you cannot refinish this type of flooring. In another decade or two, you or another owner will find it necessary to install new flooring rather than simply refinishing.

You can use drywall mud to add texture and visual interest to your walls. This will also cover up any nicks or blemishes. Adding texture to your walls can be so simple. Use a trowel to apply the joint compound, and then dab with a sponge, brush, or a crunched up newspaper to add some texture.

When it comes to older homes that have carpet throughout the household, you get many years of use and wear, which leaves outdated mess and stains. In contrast, wood floors carry a timeless elegance and are also sturdier than carpet.

A design philosophy that many people are using is the age-in-place design strategy. Age-in-place is a design philosophy which considers the homeowner’s age over the amount of time they own the home. No matter how long you plan on staying in your house, these additions will make your home a more comfortable place to live.

Try to determine in advance the amount of paint you will need for any painting job. Don’t guess about the costs because that can end up costing you big time. Take your time and simply measure what you are painting.

To help you stay on top of home improvement projects, start a budget for repairs, upgrades and other house-related expenses. Your home will look better and stay trouble free if you actually spend a little on it each year. If money is left over at the year’s end, it can go toward more home improvement work in the days to come.

Never underestimate the important of a quality door. It’s both the first, as well as last, sight of visitors to your home. Heat can be lost through a misinstalled door. And if you’ve got older locks or frames, these could be a security risk.

If your home is in a dry area that is prone to fires, you should consider buying white or red cedar fences. Cedar is good because of its safety with regards to wildfires.

Simple renovations are a great place for a beginner to start. The tips in this article will help to guide them to success. The accomplishment you feel will be worth every second spent.

Easy Ways Of Speeding Up Your Website Instantly

Posted on by

Many clients wonder why their website is slow and why it gets slower every couple of months. We often assist clients in determining issues with their website and sometimes even need to convince them that it is not related to their hosting service. It’s like having a great car but a lousy chauffeur. No matter how good the car maybe and how fast it could go, if the chauffeur is not competent, the high-end car is worthless. In the same way, no matter how fast your hosting server is, if you do not have a well coded and well designed website, your website is bound to open with a crawl. This article helps draw the attention of website owners to the various things that can be done to speed up their website to make it more SEO friendly.

Clean Code e

The most important thing you need to do to improve your website’s load time is the clean and simple programming. There are some programmers who can obtain special effects on a page with 50 lines of code. There are better programmers who can achieve the same thing in 20 lines of code. This is dependent on the skills and experience of the programmer and the logical thought process. Even Search Engines want to serve up clean and quick content to their website visitors. They don’t want to inflict upon their visitors a slow and cluttered website. The short solution is to Keep It Simple.

Onsite resources

When linking to images or other media that we like from an external website, we often prefer to load the image or music or video by embedding the other persons link in our own page. This is also known as hot-linking. Earlier, some webmasters used to do this to save on their own websites bandwidth usage by causing the image to load from another person’s website and using up their bandwidth.

CDN and Content Caching

A CDN is a content distribution network, which distributes a mirror copy of your website across their global network of servers. When a visitor requests a page from your website, instead of contacting your web hosting server, it contacts the server closest to the visitor, which has a mirror copy of the website. This greatly reduces the time taken to access the page and serves up the content at lightning speed. From time to time, the cache of your website, which is mirrored on the CDN servers is updated. This means that any changes that you make on your website will not be updated across the CDN instantly and your visitors will see a delay in the fresh content. However, you may choose to cache only the static parts of your website which do not change very often, but the dynamic parts of the website can be called from your web hosting server directly.

You can also use page caching techniques to make your pages load faster by creating a temporary storage of the content on the users computer. This may cause a delay in displaying fresh content, but you can tweak the cache to only store the static pages to serve up faster.

Minimize Plugins and Frills

A major cause of your website slowing down is 3rd party plugins. We all want to connect with our audience on social media, but you should avoid using third party plugins for social networking. Some of these plugins pull statistics and display information from the plugin creator’s website, which may lead your website to become slow. While your page loads, the information is constantly requested from the plugin makers website, which causes your page to remain waiting till the data is transferred from there. A slow plugin may cause your visitors to see the page loading indication in their browser and may also cause other parts of your page or other plugins to remain in the queue. This can drastically reduce the speed of your website pages. To avoid this situation, it is best to remove slow plugins and constantly monitor the page load speed accordingly.

Compression

Some compression tools which are inbuilt on your web server allow you to compress each request before sending it to your visitor’s computer. When a visitor requests a webpage from your website, the server will zip up the page content and send the compressed information to the users browser. The visitors browser will then decompress the data and unzip the file for display. This reduces the size of the data being transferred, leading to a reduction in speed and also a reduction in data transfer usage. Compression takes up a bit of processing power on the visitor’s machine and on the server, but the CPU usage is so negligible that it is worth the resources to increase the speed of the website loading.

Get an Unlimited Hosting Plan at the best web hosting prices only at HostingXtreme. We offer affordable value-for-money services. To know more visit our website today.